How to remove BIOS password from Toshiba laptops
You can use this plug to remove or clear the BIOS password from older Toshiba laptops. I tested the plug and it successfully cleared the BIOS password from Toshiba Satellite 1415, Satellite 1800 and Satellite Pro 6100. Using the plug you should be able to remove a BIOS password from most Pentium III Toshiba laptops and from some Pentium IV laptops. To make a password removal tool you need a DB25 plug from a parallel printer cable (cable with a plug that you can take apart), a solder gun and 30-40 minutes of your time.

Cut a DB25 connector off an old parallel printer cable and remove screws to disassemble the plug. The wires should be long enough to strip the ends and solder them.
All pins on the connector are marked from 1 to 25 and you should connect and solder together the wires from the following pins:
|
1+5+10 |
2+11 |
3+17 |
4+12 |
6+16 |
7+13 |
8+14 |
9+15 |
On some connectors pins 18 through 25 are already connected. If they are not connected, connect them. Do not connect a wire from pins 18-25 and a ground wire to anything, just insulate it with electrical tape and leave alone.

Carefully fold the wires, put wires inside the DB25 connector and assemble the connector.

How to use the Toshiba BIOS password removal tool: connect the plug to the parallel port on your Toshiba laptop and turn on the laptop. You should bypass the BIOS password and the laptop will boot directly to the operating system.
UPDATE for all Toshiba owners:
Some new Toshiba laptops can start asking for the BIOS password even if it never been set. This affects the following models: Satellite A100, A105, A130, A135, A200, A205, L35, M200, M205, P100, P105, P200, P205 and probably some others.
Before you can use the laptop, the BIOS password has to be cleared.
What can you do? Read this official support bulletin for more information. In this bulletin you’ll find a full list of Toshiba laptops affected by this problem.
If you have one of these laptops and it set the BIOS password on its own, Toshiba will clear the password at no charge. Read the bulletin.
Entry Filed under: Laptop Tips and Tricks
83 Responses to “How to remove BIOS password from Toshiba laptops”
Pages: « 9 8 7 6 [5] 4 3 2 1 » Show All
Pages: « 9 8 7 6 [5] 4 3 2 1 » Show All
May 24th, 2008 at 3:15 am
it is good
May 23rd, 2008 at 6:01 pm
hi
how to remove password for toshiba, if the unit have not
pararel port? anyone info for me ?
thanks for reply, i wait
warm regards
May 20th, 2008 at 8:48 pm
Send to :
PPT
7343 lake Worth Road
Lake Worth, FL 33467
She charges $90.00 plus cost to ship back to you. It was done right . Didint loose anything. IM happy! Password Removed by a professional Toshiba
(561) 574-4357
May 19th, 2008 at 12:21 pm
Sam,
Could be helpful.
This method will not work for newer Toshiba laptop anyway. Here’s another thread dedicated to removing the BIOS password from Toshiba laptops. Read comments too.
May 19th, 2008 at 11:14 am
Hi guys, nice job, I have a Sat pro A120 which doesnt have a parallel port so cant use this method, anything else I can try?
May 12th, 2008 at 7:39 pm
@41 Diego Says:
April 13th, 2008 at 3:49 pm
Satellite A60
1. Open Wi-Fi slot cover
2. Lift up black plastic
3. Locate & short C561 Pin 1 & 2 together
4. Power on machine while still shorting Pin 1 & 2
5. As soon as the TOSHIBA logo appears, remove short
6.
7. If machine boots, password has been removed
————————
THANKS DIEGO!
Great Job!
It works!
Mine is Toshiba A60-197
May 6th, 2008 at 10:28 pm
This method does not work for toshiba satellite M35-S320. Is there any other solution. I opened up the whole laptop, removed the CMOS battery cable, and it still did not work. I am trying to find the EEPROM or PROM, but I cannot find it or where it is located on the system board. Please help. Thanks.
May 3rd, 2008 at 6:32 am
hi
how i can recover or reset a bios pasword for a toshiba satellite m70-168
April 30th, 2008 at 7:44 am
i want u to send me some method on which i can remove password on various laptops
April 13th, 2008 at 3:49 pm
Satellite A60
1. Open Wi-Fi slot cover
2. Lift up black plastic
3. Locate & short C561 Pin 1 & 2 together
4. Power on machine while still shorting Pin 1 & 2
5. As soon as the TOSHIBA logo appears, remove short
6.
7. If machine boots, password has been removed