Notebook hardware control and monitoring software is very neat utility for controlling hardware components on your notebook computers and it is free for personal use!
Using this utility you can:
- Monitor CPU clock, CPU load and CPU voltage
- Monitor CPU temperature and hard drive temperature
- Control CPU multiplier
- Control CPU warning and shutdown temperature
- Monitor hard drive SMART and temperature
- Monitor physical memory and virtual memory state
- Monitor battery status

Notebook Hardware Control

I just found this software and still testing it. You can download notebook hardware control utility here. Make sure to read the beginner’s guide.

 

If you find this article useful, please consider making a donation to the author. Thank you!

 

 

 

 

25 Responses to “Notebook hardware control and monitoring software”

Pages: [3] 2 1 » Show All

  1. 25
    ano Says:

    May i ask the same question for erasing the whole hdd ? That means of course : a hd proteced by password.

    Thanks again.

  2. 24
    ano Says:

    Hi everybody

    Any chance to erase a hard disk password ?

    I already tried a lot of professional software.

    Thanks in advance.

  3. 23
    selam abebe Says:

    plese help me out my benq joybook lite 102 has failed to start .at first my usb port has failed and one day i stake for about half an hour the i couldnot be able to open it .when i try to open even boot manager i will stake at there and it just start to boot again can any body tell me what its problem is ,is it the board i say this becase i try to fix the hard disk and the ram but i have red from the pc that they are properly working .plese repond me as fast as u can pllllllllllllllllllllese

  4. 22
    M.B.O Says:

    thanks for this program , but i have problem when i run the program , << Could not load the NHC driver !

    i have windows7 64 bit

  5. 21
    Billy Hill Says:

    I tried this program, and it uses 166 MB of virtual memory! Talk about a drain on system resources.

    Why does it have to be that big?

  6. 20
    El_Bucho Says:

    Thank’s a lot, you are realy great

  7. 19
    Robin Berry Says:

    This is a great site – thanks so much for this addition to the net.

    I just wanted to mention to others that are looking to keep their laptops cool – we ensure that all employees in our office who have a laptop use a Targus Chill Mat – it keeps the laptop cool all day long.

  8. 18
    joe Says:

    CJ, I have satellite m35x-s149 with celeron M 340 (1.5GHz) and I tried to monitor with Notebook Hardware Control software and I am unable to see the CPU voltage and temperature but I seem to be able to see other measurements in real-time. I use Speedfan and the same thing happend. Do you know a way to get around this? What software can see monitor the CPU temp and voltage of my notebook?

  9. 17
    Steve Richardson Says:

    Great Site, useful information. Keep up the great work and thanks

  10. 16
    stephen Says:

    i have a laptop whose v network card connects at 400mb/s and my LAN is star running at 100mb/s. i use cat5 cables whose maximum data transmission is 100mb/s so when i connect the laptop it shows its connected but i can not browse the web and send mails via microsoft outlook yet microsoft outlook configuration is quite okay. my network is DHCP enabled so i dont need to enter the IP[ conifuration. how do i solve this?

Pages: [3] 2 1 » Show All

Leave a Reply