In this guide I show how to disassemble a laptop keyboard.

I’m doing it for fun just to see how it’s built. I’m taking apart a damaged one and have no intention to use it in the future.

I’ll be using one of my tools shown on the following picture.

STEP 1.

Remove sticky tape securing the cable to back of the keyboard.

STEP 2.

Carefully unglue the cable from the back.

STEP 3.

Start peeling off the aluminum protective film.

STEP 4.

Remove the protective film.

After the protective film is removed it cannot be reused.

STEP 5.

My keyboard had two plastic separators on the top.

They are secured to the back via pins.

Plastic pins are melted on the back and secure separators in place.

Push all plastic pins though wholes on the keyboard.

Start removing the separator.

The separator has been removed.

STEP 6.

Now you’ll have to remove all key caps.

In order to remove the key cap carefully lift it up with your fingers.

Remove the key cap so the hinge underneath stays connected to the keyboard.

Some big keys have a different design.

In addition to the hinge, some big keys (Back space or Space bar for example) might have an additional support bracket.

Remove the key cap with the support bracket.

STEP 7.

Some laptop keyboards might have blank covers on the left and right sides from the up arrow key.

Lift up and remove the blank cover.

All key caps and plastic separators have been removed.

STEP 8.

Now you can start removing key hinges – key lifting mechanisms.

Carefully separate the key hinge from the keyboard body.

Each key hinge has two parts – external and internal pieces.

When you remove the hinge, try to keep the internal part inside the external. Do not separate them.

If they separated, put them back together.

The lifting mechanism (hinge) assembled.

As I mentioned at the beginning, I’m taking this keyboard apart just for fun. That’s why I don’t care about removed parts.

If you following this guide to repair the keyboard, I would recommend to keep all hinges in the right order.

STEP 9.

Remove the sheet with silicone (or rubber) plungers.

STEP 10.

Remove the second sheet with traces.

Both sheets have been separated from the base.

STEP 11.

The sheet with traces has two layers and all traces are running between these layers.

STEP 12.

You can separate these layers from each other.

The keyboard has been disassemble.

Can you repair a keyboard? My answer is NO! Keyboards are cheap and not designed to be disassembled.

Also read how to repair individual keys.

Support this site.

 

28 Comments

Pages: « 3 2 [1] Show All

  1. 8
    Rachel Says:

    Hi,
    I have SONY VAIO VGN-NR110E and I cannot seem to reattach the space bar.
    I don’t have any problems with the other keys.
    Can you help me? Thanks!

  2. 7
    Pat Says:

    Thank you for a superb resource website. You are doing a great public service! Your step by step instructions and PHOTOS are excellent. You should incorporate all this into a book. I’d buy it! I look forward to future posts.

  3. 6
    Davey Says:

    Thanks for the pictorial guides. I can see why most technicians simply replace the laptop keyboard instead of repairing it.

  4. 5
    john chung Says:

    hi there i have expriencing replacing the LCD Inverter for my DELL Inspiron 8600 and now is like a scrap metal if someone are kind enough post some instructional video for me to put it back.

  5. 4
    Rob Says:

    At last! A website that talks plainly with great images. You are a star. I salute you. Thank you for dealing with the kind of problems for which we don’t need a dealer or engineer. Keep publishing. Cheers from the United Kingdom.

  6. 3
    Fixed my keyboard Says:

    Thank you for this post!
    You used your guide to remove a few keys for cleaning. It worked!!!
    My keys do not stick anymore.

    Sam

  7. 2
    servet Says:

    hi

    im sick of laptops battery , jack ,keyboard etc problems.
    how can i connect desktop power supply to laptop.
    there are 5 pin from battery
    im looking forward to see ur reply
    thanks

  8. 1
    John Says:

    Hi there,
    I didn’t disassemble the keyboard but your guide helped me to put the “A” key back in place. It just snapped in place.

Pages: « 3 2 [1] Show All

Leave a Reply